As shown in the block
diagram below (click to enlarge), several cables are
required to connect the SD6.3 module to the other
sections of your application.
The cables between the
loader and the SD6.3 servo board (blue blocks) are
part of the module itself.
Besides, DAISy can supply various cables to help you
with the production of your
transports.
Thus, the 30-pin and 16-pin cables going from the
module to your audio conversion board can be
supplied with the SD6.3 module.
The 30-pin cable is usually provided in 220mm length
(8,66 inches), but we may have other lengths in
stock (please, ask us if another length is required
for your design).
Finally, we remind you that for sensitive signals in
the audio domain, the shorter cables are always the
better ...
